IsyCorp: e-businnes per P.A. e Aziende by INTERSYSTEM Ingegneria Informatica   

Login / Registrati  
cw cws
SCHEDA PRODOTTO
Zoom Altra immagine ingrandita disponibile

PartNumber: 61870
  Lancom Gs-4554xp Multi-gigabit Access Switch W/ 5   (Carta di Credito Web ) 5.123,04 € + IVA Aggiungi Prodotto al Carrello
     
    Pagamento e Prezzo si cambiano nel Carrello, inserito il primo articolo.  
         
Marchio:Lancom        
Codice: 43425.01        
PartNumber:61870      
EAN:4044144618703         
dispo Disponibile c/o Vendor         
Notifica Disponibilità        
         
         
         
         
 Altri articoli del Produttore:  Lancom      
 Altri articoli nelle Categorie:/ Hardware / Networking / Switch      
 

High performance on 54 ports The LANCOM GS-4554XP is equipped with 12x 2.5 multi-Gigabit PoE+ Ethernet ports, 36x Gigabit PoE+ Ethernet ports, as well as 4 SFP+ and 2 QSFP+ FleX ports supporting transmission rates of 10 and 40 Gbps respectively. In addition, with a data throughput of 372 Gbps on the backplane, it offers wirespeed performance even at high workloads. The multi-Gigabit access switch thus forms the powerful basis for modern network infrastructures in all industries and areas of application. A high-performance basis for Wi-Fi 6 – PoE included Thanks to 12 high-performance 2.5 Gigabit Ethernet ports, the LANCOM GS-4554XP is the ideal LAN-side basis for integrating the new wireless LAN standard Wi-Fi 6 into modern infrastructures. The increased data rates when using Wi-Fi 6 require 2.5 Gigabit Ethernet, as the required perfor­mance demands exceed those of a simple Gigabit Ethernet port. This switch in combination with the corresponding PoE power thus enables the operation of up to 12 Wi-Fi 6 access points or other network components with high performance requirements – without additional electrical installation. Central power supply without additional electrical installation As a powerful PoE switch, the LANCOM GS-4554XP supplies connected PoE end devices without additional power supplies or power cabling. It supports the Power over Ethernet standards IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) with up to 30 watts per port. Thanks to high power reserves, a PoE budget of 1,440 watts is available when using both power supplies in power mode, making it ideal for efficiently powering PoE end devices with high energy requirements. LANCOM fail-safe stacking LANCOM fail-safe stacking allows up to 8 physical switches to be combined into one logical unit for convenient maintenance and management – at a single site or even distributed across different sites. Via the nonstop forwarding function, the stack manager cyclically supplies its standby with current information such as the MAC table and its own status information. In the event of a failure, the standby manager is able to take over without noticeable network interruption via the hitless failover function. Subsequent expansion of the network is also possible, as the new switch receives its configuration automatically from the stack manager and is ready for use within seconds. The stacking function can also be activated on both the front SFP+ FleX ports and the rear QSFP+ FleX ports, enabling a mixed stack with the LANCOM XS-5110F and XS-5116QF aggregation switches. Full control over your investment Fully equipped ex works, ready for immediate use, everything from a single source: In accordance with the principle of "Total Cost of Ownership" (TCO), the LANCOM GS-4554XP gives you planning security from the very beginning and at all times with regard to the acquisition costs for your network expansion. The full expansion with all necessary ports in the industry standard makes time-consuming and costly retrofitting of proprietary port modules a thing of the past. Furthermore, our accessories portfolio provides you with the necessary SFP modules and direct attach cables directly from us in tested LANCOM quality. In addition to the guarantee of maximum operational reliability through extensive load and long-term tests of the modules, you also avoid long delivery times. Full layer 3 routing for high network efficiency The LANCOM GS-4554XP is full layer 3 capable with policy-based dynamic routing via OSPF, providing dynamic network routes through one or more network segments. This provides tremendous increase in network efficiency for example in meshed networks with multiple aggregation switches at different locations. Hardware redundancy The LANCOM GS-4554XP with a "hot-swappable" PSU (power supply unit) allows the power supply to be replaced quickly and without interruption in the event of a defect. A separate plug-in module allows the addition of a second PSU. With the integration of two redundant power supply units, for example, highly fail-safe scenarios can be realized or the PoE power can be bundled and thus doubled. In addition, the redundant (N+1) fan concept also ensures fail-safe switch operation in case one of the two fans fails. Front-to-back ventilation design The LANCOM GS-4554XP protects your investment with an innovative front-to-back ventilation design. This enables optimal cooling even in 19" racks and maximizes the lifetime of the device. Cloud-managed LAN and switch stacking With the LANCOM Management Cloud, the LANCOM GS-4554XP offers fast and easy network integration as well as automatic configuration assignment. Cloud-managed LAN replaces individual device configuration with holistic network orchestration and enables automatic VLAN assignment to the desired switch ports. Configurations can be rolled out or updated simultaneously at the click of a mouse and even more complex networking scenarios easy to administer. When using the LANCOM GS-4554XP in a stack, Cloud-managed switch stacking also ensures convenient management and monitoring of the entire stack. The cloud independently detects which and how many switches belong to the stack. Learn more about professional network connectivity and configuration in the Design guide switch stacking. Secure remote management Secure communication protocols such as SSH, SSL and SNMPv3 mean that the LANCOM GS-4554XP is ideal for professional remote network management. The switch also supports the TACACS+ protocol for authentication, authorization and accounting. This solution is optimized for maximum security for multi-site network management and monitoring.


 Confezione:  
  Peso Lordo: 9,14 Kg
Dimensioni Lorde: 130x630x590 mm
 
     
 Lancom - Sito web:http://https://www.lancom-systems.com  
     
     
   

 
Tutti i prezzi NON sono comprensivi di IVA. Il Listino è in EURO, salvo se diversamente indicato. Marchi e i nomi di prodotti sono registrati dai rispettivi titolari. Dati a cura del Fornitore. Non possiamo essere ritenuti responsabili per eventuali errori o refusi presenti. Prodotti, versioni, prezzi, termini e garanzie sono soggetti a cambiamenti senza preavviso. In ogni rapporto di fornitura valgono le Condizioni Generali di Vendita. Prezzi aggiornati in tempo reale.
Perchè Comprare qui?
punto Prodotti di qualità dei maggiori Marchi
 Informazione sulla disponibilità dei prodotti
 Aiuto all'acquisto
 Sicurezza nell'acquisto
 Scelta della forma di pagamento
 Pagamenti sicuri con transazioni riservate
 Rispetto della Privacy
 Supporto nella soluzione di problemi
 Professionalità e competenza del nostro Staff
 Ricerca su richiesta di prodotti non a Listino

Tutti i Prodotti Be Quiet!
Tutti i Prodotti BenQ
Tutti i Prodotti BunkSpeed
Tutti i Prodotti Bushnell
 
 
IsyCorp Dipartimento di INTERSYSTEM Ingegneria Informatica S.r.l. Società a socio unico P.IVA 00865531008 CF 01203550353 CU MITWDG8 CCIA: 614171 © 2000-2019 E' vietata la riproduzione anche parziale.