IsyCorp: e-businnes per P.A. e Aziende by INTERSYSTEM Ingegneria Informatica   

Login / Registrati  
cw cws
SCHEDA PRODOTTO
Zoom Altra immagine ingrandita disponibile
Zoom

PartNumber: MGSD-10080F
  PLANET 13" 8 Port 100/1000base-x Sfp + 2 Port 1GbE   (Carta di Credito Web ) 322,25 € + IVA Aggiungi Prodotto al Carrello
L2/L4 Managed Metro Ethernet Switch (ac+2 Dc, Dido)      
    Pagamento e Prezzo si cambiano nel Carrello, inserito il primo articolo.  
         
Marchio:PLANET        
Codice: 87669.01        
PartNumber:MGSD-10080F      
EAN:4711213689406         
dispo Disponibile c/o Vendor         
Notifica Disponibilità        
         
         
         
         
 Altri articoli del Produttore:  PLANET      
 Altri articoli nelle Categorie:/ Hardware / Networking / Switch      
 

Descrizione disponibile anche in: Descrizione Italiana
Multiple SFP Fiber Port Switch for Growing Long-Reach Networking of Enterprise, Telecoms and Campuses PLANET latest Metro series Ethernet switch MGSD-10080F is equipped with advanced management functions and provides 8 100/1000Mbps dual speed SFP Fiber ports, and 2 10/100/1000Mbps TP ports delivered in a rugged strong case. It is capable of providing non-blocking switch fabric and wire-speed throughput as high as 20Gbps in the temperature range from -10 to 60 degrees C without any packet loss and CRC error, which greatly simplify the tasks of upgrading the enterprise LAN for catering to increasing bandwidth demands. The MGSD-10080F is specially designed for service provider to deliver profitable long distance Ethernet network. The MGSD-10080F adopts Front Access design, making the wiring and maintenance of the MGSD-10080F placed in a cabinet very easy for technicians. Flexible and Extendable Solution The 8 mini-GBIC slots built in the MGSD-10080F support dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The MGSD-10080F supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. AC and DC Redundant Power to Ensure Continuous Operation To enhance the operation reliability and flexibility, the MGSD-10080F is equipped with one 100 ~ 240V AC power supply unit and two additional 36 ~ 72V DC power input connectors for redundant power supply installation. The Redundant Power Systems are specifically designed to handle the demands of high tech facilities requiring the highest power integrity. Furthermore, with the 36~ 72V DC power supply implemented, the MGSD-10080F can be applied as the telecom level device that could be located in the electronic room. Digital Input and Digital Output for External Alarm The MGSD-10080F supports Digital Input, and Digital Output on the front panel. The external alarm offers technicians the ability to use Digital Input to detect, and log external device status (such as door intrusion detector) for the alarm as Digital Output could be used to alarm if the MGSD-10080F has port link down, link up or power failure. Cost-effective IPv6 Managed Gigabit Switch Solution for Metro Ethernet To fulfill the demand for ISP to build the IPv6 (Internet Protocol version 6) network infrastructure speedily, the MGSD-10080F supports both IPv4 and IPv6 management functions. It can work with original IPv4 network structure and also support the new IPv6 network structure. With easy and friendly management interfaces and plenty of management functions included, the MGSD-10080F Metro Ethernet Switch is the best choice for ISP and service providers to build the IPv6 FTTx edge service and for Industries to connect with IPv6 network. Layer 2 / Layer 4 Full-functioned Managed Switch for Building Automation Networking The MGSD-10080F Managed Ethernet Switch is also ideal for applications in the factory data centers and distributions. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and secure management features to protect customers Automation Ethernet network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures. Powerful Security The MGSD-10080F offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms also comprise port-based 802.1x and MAC-based user and device authentication. The port-security is effective in limiting the numbers of clients passing through, so that network administrators can now construct highly secured corporate networks with time and effort considerably less than before. Hardware Specification SFP/mini-GBIC Slots 8 1000Base-SX/LX/BX SFP interfaces, from port 1 to port 8 Compatible with 100Base-FX SFP Copper Ports 2 10/ 100/1000Base-T RJ-45 auto-MDI/MDI-X ports Console Port 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Throughput (packet per second) 14.8Mpps @ 64Bytes packet Switch Fabric 20Gbps / non-blocking Address Table 8K entries, automatic source address learning and ageing Share Data Buffer 4Mbits Flow Control IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex Jumbo Frame 9Kbytes Reset Button < 5 seconds: System Reboot > 10 seconds: Factory Default Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U high Weight 1661g LED Indicator System: PWR (Green) DC 1 (Green) DC 2 (Green) Fault Alarm (Green) Ring* (Green) Ring Owner* (Green) Per Gigabit Ports: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Power Consumption Max. 11.2 Watts / 38.2 BTU (AC input) Max. 10.8 Watts / 36.9 BTU (DC input) Power Requirements AC 100~240V, 50/60Hz 0.15A -36V DC @ 0.3A, Range: -36V ~ -72V DC Alarm One relay output for power failure. Alarm Relay current carry ability: 1a @ DC 24V DI/DO 2 Digital Input (DI) Level 0: -24V~2.1V (0.1V) Level 1: 2.1V~24V (0.1V) Input Load to 24V DC, 10ma max. 2 Digital Output (DO): Open collector to 24VDC, 100ma max. Layer 2 Function Port Configuration Port disable / enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Bandwidth control on each port Power saving mode control Port Status Display each ports speed duplex mode, link status, flow control status, auto negotiation status, trunk status Port Mirroring TX / RX / Both 1 to 1 monitor VLAN 802.1Q Tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs Link Aggregation IEEE 802.3ad LACP / Static Trunk Supports 5 groups of 8-Port trunk support QoS Traffic classification based, Strict priority and WRR 8-Level priority for switching - Port Number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP Packet IGMP Snooping IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support MLD Snooping MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support Access Control List IP-based ACL / MAC-based ACL Up to 123 entries Bandwidth Control Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps Management Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c and v3 Secure Management Interface SSH, SSL, SNMP v3 SNMP MIBs RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC-3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Standards Conformance Regulation Compliance FCC Part 15 Class A, CE Standards Compliance IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid Spanning tree protocol IEEE 802.1s Multiple Spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 Environment Operating Temperature:-10 ~ 60 degrees C for DC power input Relative Humidity:5 ~ 95 % (non-condensing) Storage Temperature:-10 ~ 70 degrees C Relative Humidity:5 ~ 95 % (non-condensing) Ordering Information MGSD-10080F 8-Port 100/1000X SFP + 2-Port 10/100/1000T Managed Metro Ethernet Switch

 Confezione:  
  Peso Lordo: 2,2 Kg
Dimensioni Lorde: 90x240x400 mm
 
     
 PLANET - Sito web:http://  
     
     
   

 
Tutti i prezzi NON sono comprensivi di IVA. Il Listino è in EURO, salvo se diversamente indicato. Marchi e i nomi di prodotti sono registrati dai rispettivi titolari. Dati a cura del Fornitore. Non possiamo essere ritenuti responsabili per eventuali errori o refusi presenti. Prodotti, versioni, prezzi, termini e garanzie sono soggetti a cambiamenti senza preavviso. In ogni rapporto di fornitura valgono le Condizioni Generali di Vendita. Prezzi aggiornati in tempo reale.
Perchè Comprare qui?
punto Prodotti di qualità dei maggiori Marchi
 Informazione sulla disponibilità dei prodotti
 Aiuto all'acquisto
 Sicurezza nell'acquisto
 Scelta della forma di pagamento
 Pagamenti sicuri con transazioni riservate
 Rispetto della Privacy
 Supporto nella soluzione di problemi
 Professionalità e competenza del nostro Staff
 Ricerca su richiesta di prodotti non a Listino

Tutti i Prodotti NesteQ
Tutti i Prodotti NGS
Tutti i Prodotti Noctua
Tutti i Prodotti NVIDIA
 
 
IsyCorp Dipartimento di INTERSYSTEM Ingegneria Informatica S.r.l. Società a socio unico P.IVA 00865531008 CF 01203550353 CU MITWDG8 CCIA: 614171 © 2000-2019 E' vietata la riproduzione anche parziale.