IsyCorp- - Descrizione in inglese Patton SN10200A/16E/RUI SmartNode SmartMedia Gateway 16 - E1/T1, 512 VoIP Channels with Std. Signaling Set. Redun PN: SN10200A/16E/RUI Patton

Marche

Marchi Principali Distribuiti

Categorie

Scegli solo i prodotti...

Last Week (2.304) Novità (12.972) Consegna Immediata (267) Disponibili Magazzino (106.338) in Promo(735) al Costo(18)

Tutti i Costi Finanziari sono esposti trasparentemente.

Tutti i prezzi NON sono comprensivi di IVA.

SCHEDA PRODOTTO

PartNumber: SN10200A/16E/RUI	Patton SN10200A/16E/RUI SmartNode SmartMedia Gateway 16	(Carta di Credito Web )	58.502,54 € + IVA
	E1/T1, 512 VoIP Channels with Std. Signaling Set. Redun
		Pagamento e Prezzo si cambiano nel Carrello, inserito il primo articolo.

	Marchio:Patton
	Codice:107630.01
	PartNumber:SN10200A/16E/RUI
	Ordinabile
	Notifica Disponibilità




	Altri articoli del Produttore: Patton
	Altri articoli nelle Categorie:/ Telefonia / Voice over IP / Gateway

Descrizione disponibile anche in:

SmartNode SmartMedia Gateway 16 E1/T1, 512 VoIP Channels with Standard Signaling Set. Redundant Universal AC Power Carriers and service providers are adding SIP-over-IP capabilities to their SS7/sigtran networks, whether to reduce costs when interconnecting with other carriers, to cost-effectively build out their network footprints, or simply to transport voice traffic across their IP backbones. As a viable replacement for the recently EOL Cisco PGW 2200 SS7/C7 solution, the SmartNode 10200 Series SmartMedia TDMoIP SS7 gateway provides sigtran SS7 stack to bridge VoIP services between the traditional public switched telephone network (PSTN)using time-division multiplexing (TDM) with SS7 sigtran protocol signalingand emerging SIP-over-IP telephony networks. Positioned at the network core or edge, SmartNode SS7 media gateways enable service providers to preserve the quality and reliability of TDM networks with SS7 signaling while transitioning to advanced IP telephony. TDM interfaces Service providers, whether providing local, long-distance or international voice services, are interconnected with a multitude of other providers using T1/E1/J1, DS3 or STM-1 links. It is critical for service providers to be able to rapidly establish new interconnections without having to always deploy new devices. SmartNode 10200 Series media gateways therefore offer flexibility and can be configured to support T1/E1/J1, DS-3 or STM-1 interfaces. Signaling and control protocols Just as flexibility in the selection and deployment of TDM links is a key requirement for service providers, the need to support multiple signaling protocols across various carrier partners is just as important. Each SN10200 media gateway provides support for the concurrent use of ISDN, SS7/C7, CAS (R2), SIP, and SIGTRAN signaling in the same device. The ability to provide both switching and conversion across multiple TDM and IP signaling protocols at once is paramount to enabling the operational flexibility and cost savings that drive service providers to expand their carrier relationships and converge their networks. In parallel with the TDM and IP signaling protocols mentioned above, SN10200 devices also support the H.248 media gateway control protocol, which enables any H.248-compliant 3-party softswitch to control a media gateway. While the softswitch manages call control interactions, the SN10200 handles transmission of call media as well as any required transcoding. Media handling Service providers will use one or more codecs on their VoIP networks according to their desire to save bandwidth, to provide a certain level of voice quality, or simply to interoperate with other VoIP devices or providers. The ability to support multiple different concurrent codecs and to allocate them in real time based on traffic is the key to delivering true network convergence. SmartNode 10200 gateways feature extensive support for various wireline, mobile and IP telephony audio formats, delivering seamless transcoding in real-time. The media gateways ship with support for G.711, G723.1, G.726, and G.729ab right out of the box, with no additional license fee required. They also offer optional support for mobile and IP vocoders such as AMR, AMR-WB (G.722.2), GSM-FR/GSM-EFR, EVRC/QCELP, G.728, G.729eg, and iLBC. SN10200 gateways offer independent dynamic codec selection per channel. This means that it is possible to assign different vocoders to different channels, on a channel-by-channel basis. The devices can then run all of these codecs concurrently and do so with no impact on system performance. SN10200 gateways also provide unparalleled support for Internet-based fax, also known as Fax over IP or Fax relay, using the T.38 protocol, which is used to carry fax communications over an IP network. (They also support the T.30 protocol for fax over the PSTN.) System density SN10200 gateways feature the industrys highest system density in a 2U form factor. Beside the capital savings achieved by purchasing less units of equipment, system density also provides operational cost savings in the form of reduced co-location fees as well as lower power and cooling costs. Energy efficiency For many, if not most, service providers, the payoff from reducing energy use can be particularly impressive; typically, for every watt of power required to operate a device, another watt is required to cool it. The SN10200 media gateways can play a major role in reducing energy costs, with an average two-thirds less power consumption than competing products of similar capacity. Provisioning and maintenance For network convergence efforts to contribute positively to revenue and profitability, service providers must maintain their reputation for uptime and availability during the introduction, operation, and maintenance of new services. The SN10200 offers OAM&P, an operations, administration, maintenance, provisioning (OAM&P) solution. OAM&P enables the service provider to perform the initial set-up of the SN10200 media gateway and any subsequent maintenance operations. These range from the simple, such as the collection of statistics and alarms, to the more complex, such as system configuration changes, the addition of new hardware or software components, and the application of software patches or software upgrades.

	Confezione:
	Peso Lordo: 10,57 Kg Dimensioni Lorde: 100x300x200 mm

	Patton - Sito web:http://www.patton.com

Tutti i prezzi NON sono comprensivi di IVA. Il Listino è in EURO, salvo se diversamente indicato. Marchi e i nomi di prodotti sono registrati dai rispettivi titolari. Dati a cura del Fornitore. Non possiamo essere ritenuti responsabili per eventuali errori o refusi presenti. Prodotti, versioni, prezzi, termini e garanzie sono soggetti a cambiamenti senza preavviso. In ogni rapporto di fornitura valgono le Condizioni Generali di Vendita. Prezzi aggiornati in tempo reale.

Perchè Comprare qui?
	Prodotti di qualità dei maggiori Marchi
	Informazione sulla disponibilità dei prodotti
	Aiuto all'acquisto
	Sicurezza nell'acquisto
	Scelta della forma di pagamento
	Pagamenti sicuri con transazioni riservate
	Rispetto della Privacy
	Supporto nella soluzione di problemi
	Professionalità e competenza del nostro Staff
	Ricerca su richiesta di prodotti non a Listino

Info	Help	Area Clienti
Contattaci ISO Comunicazioni Azienda Tecnologie Marchi Distribuiti Privacy	Perche' registrarsi? Servizi EDI ai Clienti Prodotti Difettosi Colli Mancanti o Danneggiati Garanzia Sicurezza Pagamenti	Gestione News Letter Richiedi RMA Stato di un RMA Dati Fatturazione Dati Destinazione Condizioni di Vendita